The PCB attaches to the back of the OP-320A unit, which is a cheap operator console panel you can get off aliexpress or ebay for about $50, you remove the PCB with the unit and attach this as a replacement to give arduino compatibility.
Wiring mostly copied from teensy++ and uno so something of a mix here, Uses a standard Arduino shield header but you will definitely need to adjust your sketch...
Panoramic photo robot with Bluetooth control, based on Arduino MEGA 2560
Since everything in this schematic is either public or super simple I leave it as public too.
**NOT for commercial use!**
This project of mine has just been started so there is no firmware nor software (PC, Android) available yet. Currently I don't plan to make it public like the Arduino shield design.
If you like the s...
Arduino MEGA 2560 Rev3 shield build template
Template is drawn on Document layer for easier copy-pasting into existing layout designs. Enable this layer to see the drawing.
The template contains the following:
- Arduino PCB outline
- Location of high components (electrolytic capacitors, USB and power connectors)
- All header connectors
- All mounting holes
**!!! WARNING !!!**
The...